15-20W led防水驱动电源高PFC YL-FS1520A
2014-04-29本站

27-45V 42-60V 60-90V 300-900MA LED防水驱动电源,本系列产品是专为外置LED面板灯电源,防水电源设计的驱动板,适用应用领域:面板灯,投光灯,工矿灯,遂道灯,洗墙灯,安全性高!使用寿命长,无频闪,台湾OB方案,高横流精度,高稳定性,高性价比

产品名称15-20W led防水驱动电源高PFC YL-FS1520A产品型号YL-FS1520A输出功率15-20W
输入电压100-265V输出电压27-45V 42-60V 60-90V输出电流300mA/600mA/900mA
转换效率88%功率因数0.93外形尺寸120mm×38mmX27mm
保护特性输出过载/ 输出过压/ 短路/ 过温工作温度使用寿命≥30000h

产品特点(Product Features)
15-20W led防水驱动电源高PFC YL-FS1520A
类别
Item项目
技术指标
Input
输入特性
Voltage(输入电压范围)
100-265VAC
Frequency(Hz) (输入频率范围)
47-63 Hz
Waterproof level(防水等级)
IP65
Power Factor(功率因素)
PF≥0.93@Full Load and Typical Output Voltage
Inrush Current(浪涌电流)
10A MAX.(230VAC)
Leakage Current(漏电流)
<0.5mA
Current(Full load)
(输入电流在输出满载时)
Output
输出特性
Constant current (恒流)
300-900mA最大1200mA(可根据客户要求调整电流)
Current Accuracy(电流精度)
≤5%
Voltage rang (输出电压范围)
DC27-45V 42-60V 60-90V
Load range(负载范围)
15-20W
Line Regulation(电压调整率)
5%
Load Regulation(负载调整率)
5%
Current Ripple (电流纹波)
100mAp-p
Efficiency (效率)
≥88%
Protection
(保护特性)
Over  Load
(输出过载)
110%rated output power
Protection type: Auto recovery
(保护类型: 自动恢复)
Over Voltage Protection
(输出过压)
50V
Protection type :Auto recovery
(保护类型: 自动恢复)
Short circuit Protection
(短路)
Protection type: Auto recovery
(保护类型: 自动恢复)
Over Temperature
(过温)
OTP≥100±5℃
Protection type: Auto recovery
(保护类型: 自动恢复)
Feature
(特征)
Dimension (尺寸) (L*W* H)
120mm×38mmX27mm
Weight(重量)
220.8g
Isolation resistance
(绝缘阻抗)
Input-Output, Input-FG, Output-FG:100Mohms/500vdc/25℃/70%RH
Environment/life
(环境特性/寿命)
Operating Temperature
(工作温度)
-20℃…+70℃(Refer to output load derating curve)
Storage Temperature
(存储温度)
-40℃…+85℃
Temperature Coefficient
(温度系数)
±0.03%/℃(0-50℃)
Humidity(湿度)
10%-95%RH
MTBF
>30,000h @25℃(MIL-HDBK-217F)
withstand voltage
(耐压)
Input-Output(V.AC)
(输入-输出)
3750V
Note
(备注)
1. 所有的参数无特别说明的都是在额定的输入交流230V和25℃的环境温度下测得。
All parameters NOT specially mentioned are measured at 230VAC input, rated and 25℃ of ambient temperature.
2. 此精度包含了电压调整率、负载调整率以及设计误差。
The Accuracy is the total Accuracy which Comprises the Line Regulation ,Load Regulation and Error.
3. 恒流模式仅适用于LED等相关行业。
Constant Current Mode Can Apply Only to the LED and relevant industry.
4. Ripple & Noise are measured at 20MHz of bandwidth by using a 300mm twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.( 纹波与噪声测试的标准: 用双绞线测试在300mm处并联0.1uf 与 47 uf的电容,示波器用20MHz带宽.

 

使用说明
非正常现象及相应的处理方法
订购热线:4007-168-665
(本文由亿力光电led防水电源供应整理分享)  亿力推荐:led天花灯电源

0 Comments

Add Comment

    Leave a Reply

    Required fields are marked *

    Keep in touch with us

    We can Help You. Call Us 4007-168-665

    您可以通过400免费电话联系我们!